SJ/T 9548.1-1993 预调电位器质量分等标准
作者:标准资料网 时间:2024-05-12 00:07:06 浏览:8470
来源:标准资料网
基本信息
标准名称: | 预调电位器质量分等标准 |
中标分类: |
农业、林业 >>
农业、林业综合 >>
技术管理 |
发布部门: | 中华人民共和国电子工业部 |
发布日期: | 1993-09-03 |
实施日期: | 1994-01-01 |
首发日期: | 1900-01-01 |
作废日期: | 2010-01-20 |
提出单位: | 中华人民共和国电子工业部科技与质量监督司 |
起草单位: | 电子工业部标准化研究所 |
起草人: | 彭伟 |
出版日期: | 1994-01-01 |
页数: | 2页 |
适用范围
本标准规定了预调电位器质量分等的要求。本标准只适用于碳膜类、玻璃釉类、线绕类和有机实芯类预调电位器质量分等。
本标准只给出了关键性技术指标,不是一个完整的标准,必须与SJ2 787,SJ2 788和有关
详细规范一起使用。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 农业 林业 农业 林业综合 技术管理
【英文标准名称】:SectionalSpecificationforFieldPortablePolishingDevicesforPreparationofOpticalFibers/Note:Approved1989-07-10.
【原文标准名称】:光纤制备用现场移动式抛光设备的分规范.注:1989-07-10批准
【标准号】:ANSI/EIA/TIA539AOOO-1989
【标准状态】:现行
【国别】:美国
【发布日期】:
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:M33
【国际标准分类号】:33_180_10
【页数】:
【正文语种】:英语
Product Code:SAE AMS5706
Title:Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr, Consumable Electrode Or Vacuum Induction Melted, 1825 to 1900 掳F Solution Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings. These products have been used typically for parts, such as fasteners, flanges, and rings, requiring high strength up to 1500 掳F and oxidation resistance up to 1750 掳F (954 掳C), particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.